P6-04 Hysteresis band user relay/analog outputs

Setting range: 0.0 – 0.3 – 25.0%

This parameter functions together with the function selection 2 (motor at setpoint speed) or 3 (motor speed > 0) in parameter P2-11 (DO1), P2-13 (DO2), P2-15 (relay 1) and P2-18 (relay 2).

If the speed lies within the set hysteresis band (+/- P6-04 of P1-01), depending on the function selection, the respective digital output or the corresponding relay is active (1).

If the value is too small, the digital output or relay “bounces”.