Parameter group 2: Extended parameter setting (level 2)

• P2-01 – P2-08
• P2-01 Fixed setpoint speed 1
• P2-02 Fixed setpoint speed 2
• P2-03 Fixed setpoint speed 3
• P2-04 Fixed setpoint speed 4
• P2-05 Fixed setpoint speed 5
• P2-06 Fixed setpoint speed 6
• P2-07 Fixed setpoint speed 7
• P2-08 Fixed setpoint speed 8
• P2-09/P2-10 skip frequency/skip frequency band
• P2-11/P2-13 Analog outputs
• P2-11 Analog output 1 function selection
• P2-12 Analog output 1 format
• P2-13 Analog output 2 function selection
• P2-14 Analog output 2 format
• P2-15/P2-18 Relay outputs
• P2-15 User relay output 1 function selection
• P2-16 Upper user relay limit 1/analog output 1
• P2-17 Lower user relay limit 1/analog output 1
• P2-18 User relay output 2 function selection
• P2-19 Upper user relay limit 2/analog output 2
• P2-20 Lower user relay limit 2/analog output 2
• P2-21/P2-22 Display scaling
• P2-21 Display scaling factor
• P2-22 Display scaling source
• P2-23 Zero speed holding time
• P2-24 PWM switching frequency
• P2-25 Second deceleration ramp, rapid stop ramp
• P2-26 Flying start enable
• P2-27 Standby mode
• P2-28 Slave speed scaling
• P2-29 Slave speed scaling factor
• P2-30 Analog input 1 format
• P2-31 Analog input 1 scaling
• P2-32 Analog input 1 offset
• P2-33 Analog input 2 format/motor protection
• P2-34 Analog input 2 scaling
• P2-35 Analog input 2 offset
• P2-36 Start mode selection
• P2-37 Enable behavior/changeover behavior
• P2-38 Mains loss stop control
• P2-39 Parameter lock
• P2-40 Extended parameter access code definition