P2-01 – P2-08

If parameter P1-10 is set to “0”, the following parameters P2-01 to P2-08 can each be changed in steps of 0.1 Hz.

If parameter P1-10 ≠ 0, the following parameters P2-01 to P2-08 can be changed in the following steps:

• P1-09 ≤ 100 Hz → in 1 (min^-1)
• 100 Hz < P1-09 ≤ 200 Hz → in 2 (min^-1)
• P1-09 > 200 Hz → in 4 (min^-1).

Negative speeds or frequencies can also be set.