Parameter group 6: Extended parameters (level 3)
Additional information
- P6-01 Firmware upgrade enable
- P6-02 Automatic thermal management
- P6-03 Auto-reset delay time
- P6-04 Hysteresis band user relay/analog outputs
- P6-05 Encoder feedback enable
- P6-06 Encoder PPR
- P6-07 Trigger threshold speed error/speed monitoring
- P6-08 Max. frequency for speed setpoint
- P6-09 Droop speed/load distribution control
- P6-10 Reserved
- P6-11 Speed holding time on enable
- P6-12 Speed holding time on inhibit
- P6-13 Fire mode logic/emergency mode
- P6-14 Fire mode/emergency mode speed
- P6-15 Analog output 1 scaling
- P6-16 Analog output 1 offset
- P6-17 Max. torque limit timeout
- P6-18 DC braking voltage level
- P6-19 Braking resistor value
- P6-20 Braking resistor power
- P6-21 Brake chopper operating cycle at undertemperature
- P6-22 Reset fan runtime
- P6-23 Reset kWh counter and MWh counter
- P6-24 Parameter default settings
- P6-25 Access code level 3
- P6-26 Parameter backup
