Access to parameters via index

The parameter structure of the inverter is accessed via index access in the main menu item Parameters. Depending on the parameter, you must enter the values as decimal or hexadecimal. The 7-segment display of the keypad displays hexadecimal values as follows (example value C20_hex ):

INFORMATION

You must enter hexadecimal values starting from the right.

Example: The decimal value "1000" corresponds to the hexadecimal value "3E8". You must enter this in the form "0H3E8" on the keypad, starting with "8".

• Changing the value using the Parameter menu item
• Bit pointer