Displays in normal operation
Display | Description | State | Comment/action |
|---|---|---|---|
| Output stage inhibit | The output stage is inhibited. | The drive is not controlled by the output stage. The brake is applied; without the brake, the motor coasts to a halt. FCB 01 can be selected from various sources. |
| Auto configuration | Data is transferred to the inverter via MOVILINK® DDI. | The motor is started up via MOVILINK® DDI. |
| Default stop | For further information, refer to the description of the FCBs. | The drive function (FCB) "Default stop" is active if no other FCB is selected and the system is ready. |
| Manual operation | For further information, refer to the description of the FCBs. | Manual mode is active. |
| Velocity control | For further information, refer to the description of the FCBs. | Speed control with internal ramp generator |
| Interpolated speed control | For further information, refer to the description of the FCBs. | Speed control with setpoints, cyclically via bus. The ramp generator is located externally; for example, in a higher-level controller. |
| Torque control | For further information, refer to the description of the FCBs. | Torque control |
| Interpolated torque control | For further information, refer to the description of the FCBs. | Speed control with setpoints, cyclically via bus. |
| Position control | For further information, refer to the description of the FCBs. | Positioning mode with internal ramp generator. |
| Interpolated positioning control | For further information, refer to the description of the FCBs. | Positioning mode with setpoints, cyclically via bus The ramp generator is located externally; for example, in a higher-level controller. |
| Reference travel | For further information, refer to the description of the FCBs. | The drive performs a reference travel. |
| Stop at application limits | For further information, refer to the description of the FCBs. | Deceleration at the application limit. FCB 13 is active if no other FCB is selected with the exception of FCB 02. |
| Emergency stop | For further information, refer to the description of the FCBs. | Deceleration at the emergency stop limit. |
| Rotor position identification | For further information, refer to the description of the FCBs. | Encoder commutation for synchronous motors |
| Position hold control | For further information, refer to the description of the FCBs. | Position control on current position. |
| Jog | – | Jog mode is active. |
| Brake test | For further information, refer to the description of the FCBs. | Brake is tested by applying a torque while the brake is closed. |
| Motor parameter measurement | For further information, refer to the description of the FCBs. | Motor parameter measurement active. |
| Stop at user limits | For further information, refer to the description of the FCBs. | Serves to stop at user limits. |
