Replacing other components

Proceed as follows:

  1. Set the energy storage system to a safe state.
    • Observe chapter Discharging energy storage units before service work.
  2. Perform an error analysis.
    • Be particularly careful when you have to start up the energy storage system and operate it with the door open or without a protective grid.
  3. Check whether the missing component is available as a spare part.
    • Observe chapter Spare parts overview.
  4. If the component to be replaced is available as a spare part, set the system to a safe state in accordance with the specifications in chapter Discharging energy storage units before service work.
  5. Replace the defective component.
    • Observe the information listed below for the respective spare parts.

If you cannot determine the defective component or it is not available as a spare part, contact SEW-EURODRIVE Service.

Additional information