Unsupported functions

G6 Parabolic interpolation

G33 Thread cutting, constant gradient

G34 Thread cutting, constantly increasing gradient

G35 Thread cutting, constantly decreasing gradient

G40 Nullify tool correction

G41 Tool path correction, left

G42 Tool path correction, right

G43 Tool correction, positive

G44 Tool correction, negative

G55 Selection of user coordinate system 2

G56 Selection of user coordinate system 3

G57 Selection of user coordinate system 4

G58 Selection of user coordinate system 5

G59 Selection of user coordinate system 6

G63 Thread tapping

G70 Dimensions in inch (the dimensions must be specified in mm.)

G71 Dimensions in millimeters (the dimensions must be specified in mm.)

G74 Travel to reference point/travel to home position axially

G80 Cancel working cycle

G81 Working cycle 1

G82 Working cycle 2

G83 Working cycle 3

G84 Working cycle 4

G85 Working cycle 5

G86 Working cycle 6

G87 Working cycle 7

G88 Working cycle 8

G89 Working cycle 9

G92 Set memory

G93 Time-reciprocal feed encryption

G94 Indication of feed speed in mm/min (in/min)

G95 Specification of feed speed in mm per revolution (inch per revolution)

M6 Tool change

M40 Automatic gear unit stage selection

M41-M45 Gear unit stage 1-5 for master spindle

M48 Overlapping effective

M49 Overlapping ineffective

M60 Workpiece change

E Second feed

S Spindle speed

T Tool

D Tool correction memory