Fault acknowledgment

When acknowledging a skew error in the operating mode "skew priority", the following cases are distinguished:

INFORMATION

Incorrect use of automatic adjustment can cause damage to the equipment.

• Exceeding the skew error window < 20%
• Perform a simple fault reset. This includes automatic adjustment so that the skew error is corrected.
• Exceeding the skew error window > 20%
• Perform referencing or set the skew error window to "0". Setting the skew error window to "0" initiates an automatic adjustment. Alternatively, the single axes can be moved into the skew window separately using manual mode in MOVISUITE^®, for example.