Requirements

Emergency mode can only be activated if the following conditions are met:

  • The inverter is equipped with a MOVISAFE® CS.. safety option.
  • The "Emergency mode" function must be parameterized. You can check whether emergency mode is parameterized in the parameter tree in MOVISUITE®: Functions > MOVISAFE® CS.. > Basic settings:
    • At least one muting function is set under Muting (encoder error, F-PA or EDM).
    • The maximum muting time is set.
    • You can change the parameters using the Assist CS. tool. For more information, refer to the respective product manual " MOVISAFE® CS..A".
  • An error that is set under Muting must be present in the safety option.