Removing the signal cable shield plates and terminal cover on size 8

  1. To gain access to the terminals, first unscrew all marked screws of the type cross PZ 2.
  2. Remove the signal cable shield plates in the order [5], [4], [3].
  3. You can now release the terminal cover [2] according to the arrow direction and swing it out upward with a rotary movement.
  4. After the installation, first re-install the terminal cover [2].
  5. Re-install the signal cable shield plates in the order [3], [4], [5].
  6. Fasten all screws.

[1]

Shield clip plate for signal and communication cables

[2]

Terminal cover made of plastic

[3] to [5]

Signal cable shield clips made of metal