Startup with MOVITOOLS^® MotionStudio engineering software

The software can be connected to the inverter as follows:

• Via an SBus connection between PC and inverter. The PC can be connected to the inverter via USM21A, for example.
• Via a connection of the PC with a gateway or a MOVI‑PLC^®. The PC gateway/MOVI-PLC^® connection can be made via USB11A, USM21A, USB or Ethernet, for example.

The following functions are available in MOVITOOLS^® MotionStudio:

• Monitor, upload and download parameters
• Parameter printout
• Monitor the state of inputs/outputs and of the motor.

• Connection to MOVITOOLS® MotionStudio engineering software