Speed profile
INFORMATION
Make sure that the module is always supplied with the appropriate parameters for the selected operating mode! Pay particular attention to the current values used in the output area!
In the "Speed profile" operating mode, the speed is output based on the profile acceleration and profile deceleration until the target speed is reached. You can use the object "0x8500-01 – Speed control configuration" to influence the speed control behavior.
- Changes to acceleration and/or deceleration settings are transferred directly to the profile generation.
- Actual values for speed, acceleration and deceleration are calculated by the function module itself.
- Depending on the set encoder feedback, the function module operates in open-loop or closed-loop speed control mode. A distinction is made between the following encoder configurations:
- Open loop
- Closed loop
Additional information
