Fault 37 Brake control
Fault: 37.1 (2501hex | 9473dec) Description: Brake control 1 – switching state not consistent | ||
|---|---|---|
| Response: Brake control 1 – status | |
Cause | Measure | |
The switching state of the input signal "Brake control 1 – status" differs from the switching state of the brake control (DB 00/SBC). | – Check the connection and function of brake control 1. – Check whether the selected connection is compatible with the monitoring of brake control. – Check the connection and configuration of the input signal "Brake control 1 – status". | |
Fault: 37.2 (2502hex | 9474dec) Description: Brake control 1 – switching frequency exceeded | ||
|---|---|---|
| Response: Brake control 1 – switching frequency | |
Cause | Measure | |
Permitted switching frequency of brake control 1 exceeded. | – Check the application. – Check the permitted switching frequency of brake control and the limit value of monitoring. | |
Fault: 37.3 (2503hex | 9475dec) Description: Brake control 2 – switching state not consistent | ||
|---|---|---|
| Response: Brake control 2 – status | |
Cause | Measure | |
The switching state of the input signal "Brake control 2 – status" differs from the switching state of the brake control (DB 00/SBC). | – Check the connection and function of brake control 2. – Check whether the selected connection is compatible with the monitoring of brake control. – Check the connection and configuration of the input signal "Brake control 2 – status". | |
Fault: 37.4 (2504hex | 9476dec) Description: Brake control 2 – switching frequency exceeded | ||
|---|---|---|
| Response: Brake control 2 – switching frequency | |
Cause | Measure | |
Permitted switching frequency of brake control 2 exceeded. | – Check the application. – Check the permitted switching frequency of brake control and the limit value of monitoring. | |
