Safety requirements
You must only use the safety subfunctions of MOVIMOT® MM..D for the safe operation of the system/machine if they are correctly integrated into an application-specific higher-level safety function or a safety system. It is essential that the system/machine manufacturer conducts a system-specific/machine-specific risk analysis (e.g. according to ISO 14121). Before startup, the system/machine manufacturer must validate the required safety requirements and functions. The system/machine manufacturer and the operator are responsible for compliance of the system/machine with applicable safety regulations.
The following requirements are mandatory when installing and operating MOVIMOT® MM..D in safety-related applications.
The conditions are divided into the following sections:
- Approved device combinations
- Installation requirements
- External safety control requirements
- Startup requirements
- Requirements for operation
