Brake test status in F process data
The status of the brake test is transmitted in the F process data (process input data) in the "SBT active" bit.
- SBT active = 0: Brake test is inactive
- SBT active = 1: Brake test is active
The SBT active status is inactive if the brake test shows the following states:
- Brake test has not been activated
- Brake test has ended
- Brake test was canceled. The "Diagnosis ASF" bit is also set to logical "1" as an error message.
The status is transferred to the inverter internally. It can continue to be used in the inverter, e.g. as a digital output or for transferring to the process data (PI).
