Ensuring data consistency
To ensure data consistency, you must proceed as follows:
- Apply inverter settings to the configuration of the inverter via one of the following procedures:
- Manually apply all setting values with a blue background (e.g. stiffness/zero clearance) for each inverter in MOVISUITE®.
- In the "Optimization functions" area of the inverter settings, check the "non volatile" check box and apply the values using the "Transmit mean value" and "Transmit controller values" buttons. Then execute the function "All devices -> PC" in MOVISUITE®.
- Apply the software module settings:
- Manually apply all settings with a red background in MOVISUITE® in the configuration of the software module.
- Update the configuration data via MOVISUITE®.
