Operation without acceptance

For the PROFIsafe controller, only the value of the checksum ParCRCBus (iPar_CRC) of the MOVISAFE^® CS.. safety option is relevant.

For startup and optimization purposes, the safety option can be reconfigured and tested without acceptance and without the need to adjust the checksum F_IPAR_CRC in the PROFIsafe controller.

INFORMATION

A device that is not accepted will issue a warning after switching on and after a period of 8 hours (main error 46.50, subcomponent error 66.85) indicating that the device has not been accepted. There is no response by the device. The warning can be acknowledged and reappears again after 8 hours.