F_iPar_CRC
The F_iPAR_CRC checksum in the PROFIsafe controller must match the accepted ParCRCBus (iPar_CRC) checksum of the MOVISAFE® CS..A safety option.
For the safety-related acceptance of the system, an acceptance report of the safety option is generated and archived. In chapter 3 of the acceptance report, you will find the value of the accepted checksum ParCRCBus (iPar_CRC) of the safety option.
In MOVISUITE®, you can find the accepted checksum ParCRCBus (iPar_CRC) under [Diagnostics] > [MOVISAFE® CS..] > [F-communication].
INFORMATION
The default value of the F_iPar_CRC checksum in the device description file () corresponds to the basic configuration of the MOVISAFE® CS... safety option in the delivery state. The STO (Safe Torque Off) function is assigned to the safe digital output F-DO 00 and the SBC (Safe Brake Control) function to the safe digital output F-DO 01. For the basic functionality, you must set the appropriate F parameters in the Assist CS.. tool under [F-communication], download the configuration and accept it.
Additional information
