Inverter settings

[1]

Start load moment of inertia measurement

[2]

Currently measured load inertia in kg*cm²

[3]

Measured mean value of the load inertia in kg*cm²

[4]

Deviation of currently measured mean value from previous measured value in %

[5]

Transmit the mean value of the load inertia to all inverters

[6]

Selection of whether the transmission of the load inertia is to be carried out in a power failure-proof way

[7]

Currently set (active) load inertia in kg*cm²

[8]

Stiffness (input via edit box or slider)
INFORMATION: Any change of this value is automatically transmitted to all inverters

[9]

Zero clearance (input via edit box or slider)
INFORMATION: Any change of this value is automatically transmitted to all inverters

[10]

Suggested values determined on the basis of the zero clearance and stiffness

[11]

Apply suggested values (prerequisite: "Advanced settings" [15] active)

[12]

Apply active setting values (prerequisite for manual adjustment: "Advanced settings" [15] active)

[13]

Transmit the setting values of the control to all inverters

[14]

Selection of whether the transmission of the setting values of the control is to be carried out in a power failure-proof way

[15]

"Advanced settings" for inhibiting the input of the stiffness/zero clearance and for enabling a manual adjustment of the controller values independently of each other.