Activation

Manual mode can only be activated if the MOVIMOT^® drive is inhibited.

Activation is not possible

• If the brake is released without drive enable
• or if the inverter output stage is enabled to supply a standstill current.

To activate manual mode, click the [Activate manual mode] button [1].

Parameter P097 PI 1 Actual value (display value) signals the higher-level controller that manual mode is active.

Manual mode remains active even after an error reset or after the 24 V supply has been switched off.

Deactivate manual operation before you disconnect the PC/laptop from the MOVIMOT^® inverter.