Deactivation

WARNING

Risk of crushing if the drive starts up unintentionally.
When deactivating the manual mode, the binary signals (binary control) or process data of the master (control via RS485) become active. If the enable signal is present via the binary signals or the process data, the drive can start up unintentionally when deactivating manual operation.
  • Before deactivating the manual mode, set the binary signals or process data in such way that the MOVIMOT® drive is not enabled.
  • The binary signals or process data must only be changed again after deactivating manual operation.

Deactivating manual mode

 

Use the or key to deactivate the manual mode.

The following query appears:

 

  • Press the key to return to manual mode.
  • Press the key to deactivate manual mode. The context menu appears.