Fastening the MOVI‑DPS® storage unit to the holding fixture

INFORMATION

Use only square pipes with an edge length ≤ 35 mm for mounting the unit to avoid mechanical interference.
  1. Hang the MOVI-DPS® storage unit with the mounting brackets [2] into the holding fixture [1].
  2. Secure the mounting bracket to the holding fixture with suitable M6 or M6 bolts. Observe the maximum tightening torque of 3.2 Nm.

[1]

Holding fixture (square pipe with an edge length ≤ 35 mm) (2×)

[2]

Mounting bracket (4×)

[3]

Fastening plate (2×)

[4]

MOVI-DPS® storage unit