ECR-HA2M holding roller

ECR-HA2M holding roller
Holding roller with integrated mechanical 24 V holding brake with gear unit I = 18 Connection to 24 V or 48 V ECC-DFC fieldbus controller Mechanical design like motor roller Automatic brake control with ECC-DFC-.. in combination with an ECR-A motor roller 4.5 Nm holding torque 4-pin M8 standard connector with 1000 mm cable DC-operated electromagnetic disk brake that releases electrically and closes through spring force. The brake is applied when the voltage supply is interrupted. The brake meets the basic safety requirements.

Holding roller with integrated mechanical 24 V holding brake with gear unit I = 18
Connection to 24 V or 48 V ECC-DFC fieldbus controller
Mechanical design like motor roller
Automatic brake control with ECC-DFC-.. in combination with an ECR-A motor roller
4.5 Nm holding torque
4-pin M8 standard connector with 1000 mm cable
DC-operated electromagnetic disk brake that releases electrically and closes through spring force.
The brake is applied when the voltage supply is interrupted. The brake meets the basic safety requirements.

ECR roller drive, ECG gearmotor, ECC fieldbus controller