Mount preassembled insulating elements on the axis module

Proceed as follows:

  1. Push the conductor rails [1] under the DC link busbars [6] of the particular module in the main row and auxiliary row, and use the screws [7] to connect them. Tighten the screws with the specified tightening torque  .
  2. Install the touch guard [9] on the insulating elements of the connection unit.
  3. Screw in the screws [10] in and tighten them. The tightening torque is 2.5 – 3 Nm. Perform this step for the connection unit for the main row and auxiliary row.