Installing a card

INFORMATION

Cards can only be installed in axis modules suitable for option cards.

Observe the safety notes in chapter Electrical installation.

For information on which option card can be installed in which slot, refer to chapter Card slots.

The procedure shows an example of the installation of a multi-encoder card CES11A.

  1. Disconnect the inverter from the power. Disconnect the DC 24 V supply and the line voltage.
  2. Before starting work, ensure electrostatic discharge with suitable measures. Suitable measures for equipotential bonding include, for example, using a discharge strap or wearing conductive shoes.
  3. Remove the safety cover [1] from the front of the inverter.
  4. Remove the plastic cover [1] at the card slot.

    5. INFORMATION

    Hold the card by its edges only.
  5. Take the card [1] and insert it into the slot with slight pressure.
  6. Screw in the card with the specified tightening torque.
  7. Attach the safety cover to the front of the inverter again.