Replacing the MOVIONE® drive unit

Replace the drive unit as follows:

  1. Observe the safety notes in chapter Creating a safe working environment.
  2. Attach the lifting eyes to the drive unit, see chapter "Service" > "Device replacement" > Installing the lifting eye for motors without gear units.
  3. Remove the drive unit. Observe the removal notes in chapter "Mechanical installation".
  4. Compare the data on the nameplates of the old drive unit with the data on the nameplates of the new drive unit.

    5. INFORMATION

    Always replace the drive unit with a drive unit that has the same properties.
    In safety-related applications, replace a drive unit only with a drive unit with the same FS logo.
  5. Mount the drive unit. Observe chapter Mechanical installation.
  6. Remove the lifting eyes from the new drive unit. Store the lifting eyes for future service work.
  7. Perform the installation according to chapter Electrical installation.
  8. Remove the memory module from the old inverter. Install this memory module in the new inverter.
  9. Place the inverter onto the connection box and screw it in place.
  10. Supply the drive with voltage.
  11. Check whether the new drive unit is functioning properly.