Removing the inverter

Remove the inverter as follows:

  1. WARNING! Electric shock caused by dangerous voltages in the connection box. Severe or fatal injuries. De-energize the device. Pay attention to the 5 safety rules in chapter "Carrying out electrical work safely". Afterwards, wait 5 minutes.
  2. WARNING! Risk of burns due to hot surfaces. Severe injuries. Let the device cool sufficiently before touching it.
  3. Loosen the screws of the inverter.
  4. Lever the inverter off the connection box as shown in the following figure. Pay attention to the intended positions in the figure when doing this.
  1. NOTICE! Loss of the guaranteed degree of protection. Possible damage to property. When the inverter is removed from the connection box, the inverter and the wiring space must be protected from humidity, dust, and foreign particles.