Installing the shield plate

The shield plate enables the installation of the cables for motor and brakes as well as the control and signal cables. The shield plate for the motor and brake cable is included in the scope of delivery for inverters.

[1]

Retaining screws for the shield plate for power cables

[2]

Shield plate for power cables

[3]

X3: Motor connection

[4]

Retaining screws for the shield plate for signal cables

[5]

Shield plate for signal cables

[6]

X1: Connection for supply system

Proceed as follows:

  1. Unscrew both retaining screws [1] far enough that the rear shield plate [2] can be inserted.
  2. Install the shield plate [2].
  3. Tighten the retaining screws [1].
  4. Install the front shield plate [5] as shown and tighten the retaining screws [4].