Transferring parameters from the keypad to the inverter

  • The CBG21A keypad is connected to the inverter.
  • The file is located on the keypad.
  1. Select the Data management icon from the main menu.
  2. Confirm with the <OK> key.
    • The Data management window is displayed.
  3. Select the entry Keypad -> inverter [1].
  4. Confirm with the <OK> key.
    • The Select file window is displayed.
  5. To delete the selected file, press the 2nd function key [Delete file] [3].
  6. Select the file [2].
  7. Confirm with the <OK> key.
    • The menu for transferring the parameters is displayed.
    • The Start button [4] is preselected.
  8. Confirm with the <OK> key.
    • The following query is displayed: "Do you want to load the data set into the inverter? WARNING: Doing so can cause the drive to start automatically."
  9. Check that there are no persons in the area of rotating parts.
  10. Confirm with the <OK> key.
  • The data set is loaded from the keypad to the inverter. The green check mark indicates the successful download.