Multi-motor drive / group drive

Group drives are mechanically decoupled from each other (e.g. different conveyor belts). In this operating mode, the inverter operates without slip compensation and with a constant V/f ratio.

Multi-motor drives are mechanically coupled to each other (e.g. chain drive with multiple motors). Observe the notes in the publication "Multi-Motor Drives".

WARNING

Switching between drives cause current peaks.

Potential damage to property or disconnection with fault F01 overcurrent.

• Switch the frequency inverter output only when the output stage is inhibited.

• Motor currents
• Motor cable
• Motor size
• Output filters