Setpoint source selection parameters
Parameters for selecting a setpoint source define the signal source for setpoint source 1 to 8. Parameters defined as data sources have the following range of possible settings:
|
Inverter display |
Setting |
Function |
|---|---|---|
|
|
Analog input 1 |
Analog input 1 signal level (P0-01). |
|
|
Analog input 2 |
Analog input 2 signal level (P0-02). |
|
|
Fixed setpoint speed |
Selected fixed setpoint speed. |
|
|
Keypad (motorized potentiometer) |
Keypad speed setpoint (P0-06). |
|
|
PID controller output |
PID controller output (P0-10). |
|
|
Master speed setpoint |
Master speed setpoint (master/slave operation). |
|
|
Fieldbus speed setpoint |
Fieldbus speed setpoint PI2. |
|
|
User-defined speed setpoint |
User-defined speed setpoint (PLC function). |
|
|
Frequency input |
Pulse frequency input reference. |
