Process output words
Description | Bit | Settings | ||
|---|---|---|---|---|
PO1 | Control word | 0 | Output stage inhibit (the motor coasts to a stop), for brakemotors the brake is applied immediately. | 0: Start 1: Stop |
1 | Rapid stop along the second deceleration ramp/rapid stop ramp (P2-25) | 0: Rapid stop 1: Start | ||
2 | Stop along process ramp P1-03/P1-04 or PO3 | 0: Stop 1: Start | ||
3 to 5 | Reserved | 0 | ||
6 | Fault reset | Edge 0 set to 1 = fault reset | ||
7 to 15 | Reserved | 0 | ||
PO2 | Setpoint speed in % (default setting), freely configurable with P5-09 | |||
PO3 | No function, freely configurable with P5-10 | |||
PO4 | No function, freely configurable with P5-11 | |||
