Requirements

• For communication via CIP Safety™, the safety option must be connected to a fail-safe controller (F-originator) via EtherNet/IP™.
• To ensure that the safety option (target) can be configured correctly in the engineering tool of the fail-safe controller, it must be ensured that the current version of the electronic data sheet file (EDS file) is installed.
• Firmware version 4.01 or later is required for the CS..A safety option.
• Firmware version 9.00 or later is required for the basic unit.
• Firmware version 5.00 or later is required for the CFE21A fieldbus option.
• MOVISUITE^® engineering software version 2.30 or later (download from www.sew-eurodrive.com).