IP address settings

The standard engineering interfaces of the controllers (see chapter Standard engineering access) have the following IP address settings in the delivery state:

  • IP address: 192.168.10.4
  • Subnet mask: 255.255.255.0
  • Standard gateway: 192.168.10.4

With the following controllers, the DIP switch can be used to set whether the IP address is fixed at 192.168.10.4 or whether the address set by the user on the memory card is used:

  • MOVI-C® FIELD CONTROLLER standard MFC1../
  • MOVI-C® FIELD CONTROLLER advanced MFC1../
  • MOVI-C® CONTROLLER standard
  • MOVI-C® CONTROLLER advanced

For a description of the individual functions of the DIP switches, refer to the operating instructions of the respective device. You can download the documentation from the SEW-EURODRIVE website (www.sew-eurodrive.com) in various languages.

The IP address is not retained when the delivery state is restored.