MOVISAFE® F-Protocol Editor
INFORMATION
For a detailed description of the MOVISAFE® F-Protocol Editor configuration tool, refer to the manual "MOVISAFE® F-Protocol Editor Configuration Tool".
The MOVISAFE® F-Protocol Editor configuration tool facilitates the PROFIsafe configuration of the inverters of the MOVI‑C® modular automation system.
The MOVISAFE® F-Protocol Editor can be started from the TIA Portal engineering tool from Siemens and in this way enables the configuration of PROFIsafe devices in accordance with the specifications of the TIA project planning.
The following PROFIsafe parameters can be set using the MOVISAFE® F-Protocol Editor without the MOVISUITE® engineering software:
- Destination address (F_Dest_Add parameter)
- Source address (F_Source_Add parameter)
- PROFIsafe address type
- PROFIsafe communication profile
These parameters are adopted automatically from the device configuration in the TIA Portal and can be modified in the MOVISAFE® F-Protocol Editor.
To ensure that communication is established to the correct device, MOVISAFE® F-Protocol Editor includes an LED flashing function that allows the user to visually identify the target device in the PROFINET network.
