Configuration of the EtherCAT®/SBus^PLUS stations

In the project example, the following devices are EtherCAT^®/SBus^PLUS stations:

• The MOVI-C^® CONTROLLER serves as EtherCAT^®/SBus^PLUS master.
• The application inverters serve as EtherCAT^®/SBus^PLUS slaves.

The devices are configured and started up in the MOVISUITE^® engineering software and the integrated IEC editor.

The EtherCAT^®/SBus^PLUS stations are configured in several process steps:

1. Establishing a connection between engineering PC and MOVI‑C^® CONTROLLER
2. Creating a project in MOVISUITE^®
3. Including the MOVI‑C^® CONTROLLER in MOVISUITE®
4. Configuring devices in the IEC Editor
5. Including the application inverter in MOVISUITE^®

• Establishing a connection between engineering PC and MOVI‑C® CONTROLLER
• Creating a project in MOVISUITE®
• Including the MOVI‑C® CONTROLLER in MOVISUITE®
• Configuring devices in the IEC Editor
• Including the application inverter in MOVISUITE®