Parameter 131

Ramp t11 down

  • When using MOVIMOT® with binary control, the deceleration ramp t11 down only applies if
    • switch t1 is deactivated, i.e. if P102:15 = "1".
  • When using MOVIMOT® with RS485 control, deceleration ramp t11 down only applies if
    • switch t1 is deactivated, i.e. if P102:15 = "1"
    • and the drive is running in 2 PD mode.

The ramp time is based on a setpoint step change of 1500 min-1 (50 Hz).