Installation of MBG11A option
There are two ways to mount option MBG11A to a wall:
A: | Mounting from the rear using 4 tapped holes. (tightening torque of retaining screw [1]: 1.6 – 2.0 Nm) |
B: | Mounting from the front using 2 mounting holes (tightening torque of retaining screw [3]: 1.6 – 2.0 Nm) |
[1] | a = Wall thickness Screws are not included in the scope of delivery! |
Fit the upper part [5] onto the lower part [2] and secure it with two screws [4] (tightening torque 0.3 Nm).
For information on connecting the MBG11A option, refer to chapter Connection of MBG11A option.
