Fan assembly (optional)
The MOVI-DPS® storage unit EKS...A-...350M03.SA..-00 is optionally available with a pre-assembled fan assembly. In this storage unit, three energy storage modules are installed along the x‑axis.
At high power throughput, the individual energy storage modules of the MOVI‑DPS® storage unit heat up. This reduces the service life of the MOVI‑DPS® storage unit. Using a fan assembly lowers the operating temperature of the MOVI-DPS® storage unit and therefore reduces the temperature rise of the individual energy storage modules. This increases the service life of the MOVI‑DPS® storage unit.
The fan assembly consists of two fans. The fan assembly is always delivered mounted on the MOVI‑DPS® storage unit.
INFORMATION
No handles can be used for MOVI‑DPS® storage units with fan assembly.
The following figure shows the fan assembly mounted on a MOVI‑DPS® storage unit:
[1] | Fan assembly |
[2] | X5151: Connection of the DC 24 V supply |
[3] | Connection point for grounding or equipotential bonding |
