Startup of the MOVIKIT^® modules

WARNING

Fire hazard due to failure to respond to a fault.

Severe or fatal injuries.

• Make sure that the diagnostic signals supplied by the energy storage system can be evaluated at all times. Use the "Storage unit monitoring" function of the MOVIKIT^® software modules for this purpose. For further information, refer to the MOVIKIT^® manuals.

During startup, settings must be adjusted in the PowerMode or EnergyMode software module. Adjust the following settings:

• Storage unit monitoring
• Storage unit synchronization/disconnection
• Control of the multi-fuse concept

In addition, optionally adjust settings if a discharge option via a braking resistor is provided.

For further information about programming, refer to the corresponding MOVIKIT^® manual.