MDE90A-0750..

The MDE90A-0750.. has 2 shield plates for power cables. They are installed at the lower shield plate fastenings on the bottom of the module.

[1]

Retaining screws for shield plate

[2]

Shield plate fastening

[3]

Shield plate

Installing the shield plate

Proceed as follows:

  1. Screw the retaining screw [1] into the shield plate fastening [2] but do not tighten it yet.
  2. Install the shield plate [3] as shown.
  3. Tighten the retaining screws [1].