DC 24 V supply with an MDS90A.. switched-mode power supply module, an MDR90B.. supply and regenerative module, and an MDF90B.. filter module

The following image shows a connection example with an MDS90A.. DC 24 V switched-mode power supply module in combination with an MDR90B.. supply and regenerative module and an MDF90B.. filter module. All modules are supplied with DC 24 V voltage directly via the DC 24 V connection X5.

INFORMATION

The MDS90A.. must be attached to the very outside of the axis block, either on the right or on the left side. The +U_z/ -U_z DC link busbar must not be connected through to the MDS90A.. DC 24 V switched-mode power supply module.

[1]	DC 24 V connection
[2]	U_Z+/U_Z- DC link busbar

MOVIDRIVE® modular

DC 24 V supply with an MDS90A.. switched-mode power supply module, an MDR90B.. supply and regenerative module, and an MDF90B.. filter module

INFORMATION

The MDS90A.. must be attached to the very outside of the axis block, either on the right or on the left side. The +Uz/ -Uz DC link busbar must not be connected through to the MDS90A.. DC 24 V switched-mode power supply module.

The MDS90A.. must be attached to the very outside of the axis block, either on the right or on the left side. The +U_z/ -U_z DC link busbar must not be connected through to the MDS90A.. DC 24 V switched-mode power supply module.