Axis module size 6

[1]

Retaining screws for axis module

[2]

Retaining screws for shield plate

[3]

Shield plate fastening

[4]

Shield plate

Installing the shield plate

Proceed as follows:

  1. Loosen the lower retaining screws [1] securing the axis module to the control cabinet back panel, but do not unscrew it completely.
  2. Screw the retaining screw [2] into the shield plate fastening [3] but do not tighten it yet.
  3. Install the shield plate [4] as shown.
  4. Tighten the retaining screws of the shield plate [2].
  5. Tighten the retaining screws [1] again to secure the axis module to the back panel of the control cabinet and to secure the strut.