Connection of connectors

Observe the following information when connecting connectors:

• Observe the specified coding for the M12 connectors on the device side when selecting the cable-side connectors, see chapter Connector assignment at the interface module
• When connecting the cable, make sure that the cable-side connectors are fully interlocked with the M12 connectors on the device side (push-pull or M12x1 thread).
• The device-side connector positions are fixed in the mounting position and in the angular position and cannot be changed by the user. The connector positions are defined in such a way that the cable outlet of all connections is coordinated when using right-angle connectors. For information on changing the cable outlet direction when using right-angle connectors, see chapter Rotating the interface module.
• Ensure that no forces or torques act on the plug connections during cable installation or operation.