Interference emission
The cable length must be as short as possible for EMC-compliant installation. SEW‑EURODRIVE recommends using low-capacity cables. To comply with limit class C1 or C3 according to EN 61800‑3, the measures listed below must be taken.
Limit class C1
Inverter | Measures | |
|---|---|---|
On the line side | On the motor side | |
CNF.. line filter | Shielded cables | |
MCB91A.. | CNF.. | ✔ |
Limit class C3
Inverter | Measures | |
|---|---|---|
On the line side | On the motor side | |
CNF.. line filter | Shielded cables | |
MCB91A.. | – | ✔ |
INFORMATION
