Starting conditions

Pay attention to the following starting conditions before activating the brake test.

• The machine must be in a suitable test position that makes a movement possible during the active brake test. The performance of the brake test must not put persons at risk.
• Activate a suitable drive function (e.g. FCB 02) at the inverter, which allows the brake test to be performed.
• The brake test is canceled if a drive function with a priority higher than FCB 23 is activated. You will find the current drive functions in the inverter in chapter "FCB concept". More information about the FCB concept is described in the inverter product manual.
• Pay attention to compatibility with the safety sub-functions. Refer to chapter "Safety sub-functions" for more information.