Procedure

INFORMATION

For more information on how to attach the brackets to square pipes or bars, refer to chapter Mounting accessories.

You can use mounting brackets to fasten all braking resistors that are sizes 1 and 2.

Proceed as follows:

  1. Use the M5 × 12 pan head screws [1] to attach the mounting brackets [3] to the braking resistor [2].

    2. [1]

    M5 × 12 pan head screws

    [2]

    Braking resistor

    [3]

    Mounting bracket

  2. Ground the housing of the braking resistor.