Procedure

  • For the device dimensions X1 and Y, refer to the dimension drawings in the product manual > chapter Technical data.
  • The bore dimension X2 for the bores in the holding fixture can be derived from the housing dimension X1 ‑ 30 mm.
  • The clearance dimension A of the holding fixtures can be derived from the housing dimension Y ‑ 145 mm. Note that the distances are asymmetrical.
  1. Mark the bore dimension X2 for the holding fixture bores.
  2. Mark the dimension A at the installation location.
  3. Mount the holding fixture at the installation location at the calculated distance.