Use in IT systems

Deactivating the EMC capacitors

Proceed as follows:

  1. Disconnect the inverter from the power.
  2. Check if the inverter is de-energized.
  3. Break out the EMC plastic insulations.
  4. Unscrew the retaining screws [1] and [2] on the side of the inverter.
  5. Insert the retaining screws [1] and [2] into the previously broken-out plastic insulations.
  6. Re-install the retaining screws.
  7. Mark the modification on the nameplate in the "IT system activated" box [1] provided for this purpose.